Guided Wave Radar

Guided Wave Radar



Order

Description

BinMaster’s GWR-2000 guided microwave level transmitter provides continuous level measurement in vessels up to 100 feet tall with accuracy of ±  0.08 inches (2mm). This sensor features hazardous location approvals, a very small upper dead zone, and assures highly accurate level measurement in low dielectric materials down to 1.3. The BinMaster GWR-1000 level sensor measures powders, bulk solids and liquids in vessels up to 78’ tall. It provides highly accurate, continuous level measurement utilizing time domain reflectometry (TDR) to measure the distance, level and volume of material contained in bins, tanks and silos.


Spesification

 

Sensor level tank guided wave radar

 

GWR 100 Base

GWR-1000 - 2-Wire guided microwave level transmitter, 18-35 VDC, 4 to 20 mA output with
HART, process temperature from –22°F to 195°F (-30°C to 90°C). Aluminum housing with
powder coated finish, 1-1/2” stainless steel process connection for use with the single flexible
Ø 8 mm 316 stainless steel cable. General purpose IP65. (For local LCD display you must order
SAP-300

GWR-1000-HT - High temperature 2-wire guided microwave level transmitter, 18-35 VDC, 4 to
20 mA output with HART, process temperature from –22°F to 392°F (-30°C to 200°C). Aluminum
housing with powder coated finish, 1-1/2” stainless steel process connection, for use with the
single flexible Ø 8 mm 316 stainless steel cable. General purpose IP65. (For local LCD display
you must order SAP-300

GWR-1000-L - 2-Wire guided microwave level transmitter, 18-35 VDC, 4 to 20 mA output with
HART, process temperature from –22°F to 195°F (-30°C to 90°C). Aluminum housing with
powder coated finish, 1” stainless steel process connection for use with the single flexible Ø 4
mm 316 stainless steel cable. General purpose IP65. (For local LCD Display you must order SAP-
300

GWR-1000-LHT - High temperature 2-wire guided microwave level transmitter, 18-35 VDC, 4 to
20 mA output with HART, process temperature from –22°F to 392°F (-30°C to 200°C). Aluminum
housing with powder coated finish, 1” stainless steel process connection for use with the single
flexible Ø 4 mm 316 stainless steel cable. General purpose IP65. (For local LCD Display you
must order SAP-300

 

CABLE

CP8 - Single flexible Ø 8 mm 316 stainless steel cable, with counter weight. Maximum length 78
ft. Used on Microwave Level Transmitters with 1-1/2” NPT fittings, for measurement of liquids
and heavy-weight bulk solids. Sold per foot.

CP4 - Single flexible Ø 4 mm 316 stainless steel cable, with counter weight. Maximum length 78
ft. Used on Microwave Level Transmitters with 1” NPT fittings, for measurement of liquids and
light-weight bulk solids.

CP8-N - Single flexible Ø 8 mm 316 stainless steel cable covered in FDA grade Nylon, with
counter weight. Maximum length 78 ft. Used on Microwave Level Transmitters with 1-1/2” NPT
fittings, for measurement of liquids and heavy-weight bulk solids.

 

MOUNTING PLATE

  • GRMP-6 | 1-1/2” NPT Powder coated carbon steel mounting plate with half coupling
  • GRMP-8 |1-1/2” NPT Stainless steel mounting plate with half coupling
  • GRMP-10 | 1” NPT Powder coated carbon steel mounting plate with half coupling
  • GRMP-17 | 10°, 1-1/2” NPT mounting plate
  • GRMP-18 | 30°, 1-1/2” NPT mounting plate

 

LOCAL DISPLAY UNIT

SAP-300 - Local plug-in LCD display unit. With the help of the SAP-300 plug-in display, simplified
programming can be accomplished to cover most applications. The basic parameters of
measurement and output can be set using the text-based menu system of the SAP-300. The
large LCD dot-matrix display displays the measured values in numerical and bar grap form

 

ACCESORIS

USB to HART modem