Phone / Whatsapp

0857 4065 2657 (Mashudy)

0821 1460 7782 (Faoji)

0823 1173 8960 (Fajar)

Phone Office

+62-21 29563045







Opto NCDT ILR 1181-30/ 1182-30/1183-30

Opto NCDT ILR 1181-30/ 1182-30/1183-30



Order

Description

The laser distance sensors of the optoNCDT 1181/1182/1183 series are intended for precise distance measurements up to 150 metres. Many different interfaces facilitate fast integration in existing systems. Typical applications are filling level measurements and also safety applications such as position control of gates.


Spesification

Model ILR1181-30 ILR1182-30 ILR1183-30
Measuring range 1)   black 6% 0.4 ... 17m
Measuring range 1)   grey 10% 0.1 ... 30m
Measuring range 1)   white 90% 0.1 ... 50m
Measuring range 1)   reflector 50 ... 150m (reflector film ILR-RF118x)
Linearity 2) ±2mm (+15°C … +30°C), ±5mm (-40°C … +47°C)
Resolution 0.1mm
Repeatability ≤0.5mm
Response time 1) 100ms ... 6s 20ms ... 6s 20ms ... 6s
 Laser class (IEC 825-1/EN 60825-1)  red 650nm, laser class   
Operation temperature -10°C … + 47°C (optional -40°C … +47°C, with integrated heating)
Storage temperature -40°C … +70°C
Limit outputs QA (max. 500mA) QA/QB (max. 500mA)
Switching points free adjustable
Switching hysteresis free adjustable
Trigger input (not compatible with integral heating) trigger edge and delay selectable, trigger pulse of max 24V
Serial interface RS232 or RS422 3) adjustable, max 38.4 kBaud SSI interface (RS422), 24Bit, Gray-encoded, 50kHz … 1MHz
Profibus 3) - Profibus (RS485) 9.6kBaud … 12MBaud 3)
 Operation mode  external triggering, single/continuous measurement, distance tracking  
 Analogue output   4 … 20mA (16 Bit DA)  
 Temperature stability    ≤50ppm / °C
Supply 10 … 30 VDC
Max. consumption  
Connection 12-pin M16 1 x 12-pin M16 2 x 5-pin M12 B-encoded
Protection class IP 65
Material (housing) aluminium strangeness profile, powder-coated
Vibration/Shock 500g, 0.5ms, 1 shock/axis (DIN ISO 9022-30-08-1)
10g, 6ms, 1000 shocks/axis (DIN ISO 9022-3-31-01-1)
 Weight    980g
EMV EN 61000-6-2, EN 55011
Accessoires page 14 - 15