TT210 Coating Thickness Gauge

TT210 Coating Thickness Gauge


Harga
Rp. 13.906.389

Order

Description

TT210 Coating Thickness Gauge can nondestructively measure the thickness of non-magnetic coatings (such as zinc, aluminum chrome, copper, rubber, paint and so on) on ferrous metals (such as steel, iron, alloyed metals, hard magnetic steel and so on). It can also measure the thickness of non-conducting coatings (such as rubber, paint, plastic, anode oxide film and so on) on the non-ferrous materials (such as copper, aluminum, zinc, tin and so on). It can fast, exactly and nondestructively measure the thickness of coating and plating. It is supplied with testing certificate.


Feature

  • Two measuring methods: magnetic induction (F) and eddy current (N)
  • Magnetic induction (F) method is used to measure the thickness of non-magnetic coating on ferrous metal
  • Eddy current (N) method is used to measure the thickness of non-conducting coating on non-ferrous materials
  • Automatic recognition of substrate
  • Automatic selection of measuring methods
  • 5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
  • Upper-lower limit setting and sound alarm
  • Data output to printer or PC by RS232 cable
  • 500 readings can be stored
  • 2 measuring modes: continuous / single
  • 2 stop ways: Manual/automatic

Spesification

Probe types F N
Measuring methods: magnetic induction eddy current
Measuring range: 0 to 1250 μm 0 to 1250 μm
0 to 40μm (for chromeplate on copper)
Minimum resolution: 0.1μm
Tolerance : One point calibration ±(3%H+1) ± (3%H+1.5)
H means the thickness of tested piece
Two points calibration ±[(1~3)%H+1] ±[(1~3)%H+1.5]
H means the thickness of tested piece
Measuring condition Min. curvature radius (mm) Convexity 1.5 Convexity 3
Min. testing area diameter (mm) Φ7 Φ5
Critical thickness of substrate 0.5 0.3
Power supply Battery AAA 1.5V  (2pcs)
Working Temperature 0-40°C
Dimensions 110mm×50mm×23mm
Weight 100g