Phone / Whatsapp

0813 9929 1909 (Zulfikri)

0822 5870 6420 (Anto)

0821 1460 7782 (Faoji)

Phone Office

+62-21 29563045

A1040 MIRA

A1040 MIRA



A portable handheld ultrasonic tomograph is designed for imaging of the internal structure of concrete at one-sided access

The tomograph represents fully-autonomous measurement unit for collection and tomographic processing of the data obtained. Measurement unit contains a matrix antenna array from 48 (12 blocks, each containing 4 elements) law-frequency broad banded transducers of shear waves with dry-point-contact and ceramic wear resistant tips. Hence they can work with rough surfaces for the long time. Each transducer is equipped with an independent spring suspension, thus allowing inspection on the uneven surfaces. Nominal frequency of the array is 50 kHz.

Instrument’s interface allows working with laser beams which are projected on a surface of the testing object. Hence the operator can correctly maintain a shift step of the antenna array during a complete technical diagnostics of the testing object.

Handheld light-weight body and a repositionable handle provide convenient working with the instrument on the horizontal, vertical and roof surfaces. A reference scale on the lower part of the instrument’s body is designed for convenient localization of the defects relative to the antenna device.

Large and bright TFT display and a keyboard allow easy adjustment of the instrument to the testing object, selection of the required operation modes and conduct an inspection, watching the results obtained, which allows their initial analysis.

An internal rechargeable battery provides operation of the instrument during 5 hours. Increased charge-discharge cycle enhances reliability of the tomograph for long-term application. Besides, the tomograph can be powered directly from the AC mains

The instrument allows data transfer to the external PC for advanced processing by means of the dedicated software

Inspection is carried out as step-by-step sounding of the testing object with data combining and volume reconstruction over the whole scanned surface of the testing object.


Scanning device

built-in matrix antenna array

 Operating frequency

25 – 85 kHz

 Number of transducers in the antenna array


 Type of transducers used in the antenna array

low-frequency broadband
transversal with dry point contact
and ceramic wear-proof tips

 Velocity range

from 1 000 to 4 000 m/s

 Maximum view depth in concrete

2500 mm

 Thickness measuring range

50 – 600 mm

 Maximum error (X – thickness)

±(0,05xx+10) mm

 Minimal size of a located reflector

a sphere 20 mm in diameter
at least 200 long
at the depth from 50 to 400 mm

 Display type

5,7'' TFT, colour

 Embedded memory

flash 7Gb


built-in quick-detachable battery


11,2 V

 Operating time (battery)

5 h

 PC connection


 Operation temperature range

from -10 to +50C


4,5 kg

 Size, not more than without handles

370 x 150 x 145 mm

 with handles positioned horizontally

470 x 150 x 170 mm

 with handles positioned vertically

370 x 210 x 170 mm