Phone / Whatsapp

0813 9929 1909 (Zulfikri)

0822 5870 6420 (Anto)

0821 1460 7782 (Faoji)

Phone Office

+62-21 29563045







VICAT Tester

VICAT Tester



Order

Description

Endeavors defiance and hot passion in research and development and will requite to customer by the best product


Feature

Aplication Field

Plastic

Standard

KS M 3076. ISO 306,ASTM D 1525

Product Description

  • This tester has a temperature-controlled sump (Oil Bath). There is a flat needle
    on the sump, so the degree of penetration is written to the gauge. After placing the
    needle that has prescribed load on the specimen, softening point is measured raising
    the temperature of 50 degrees per hour. This device measures the temperature(VICAT
    Softening Point) when the needle penetrates 1mm from the reference plane of the
    specimen surface
  • Softening temperature is different from the concept of the melting temperature,
    (MFR). it is a temperature when the resin soften without change, and can’t bear the
    stress. A higher softening point means that the heat resisting property is good.
    Generally, the softening temperature is proportional to density of the resin,
    therefore, softening temperature is used as a important measure of comparison to
    softening by heat of thermoplastics resins.

Spesification

Model TO-380
Temp. Controller Programming Type
P.I.D Controller
Temp. Range 200ºC
Temp. Accuracy ±0.2ºC at 50ºC
Temp. Sensor PT - 100ºC
Programming Rate 2ºC/min AUTO
50ºC/hour AUTO
120ºC/hour AUTO
Material Interior : SUS 304
Exterior : SS 41
Dial Gauge KS B 5206 1
Wight 1,000gf ~ 1,050gf (9.807 ~ 10.30N)
Cooling System Water Cooling System (Option)
Rack 3 Channel
Standard (Method) ASTM D 1525, ISO - 306, KS M 3076
Power 220V 60Hz